Custom arrow build
Step 1a:
Decide what add-ons you want on the drop downs above. You can make your arrows as custom as you like, or keep them simple and cost effective. You’ll add all the fine details in the build form in the pop up in the next step. Select “Build My Arrows” then you’ll proceed to the next step.
Step 1b:
After you selected “Build My Arrows” on this page, a build form pops up. Complete build form to the best of your ability, blanks are fine. Leave notes at the end and we’ll finalize all the details via phone. “Select Complete My Arrows” and this will add your build service to the cart with all these details you entered.
After you are done on this page then proceed to Step 2: Select which arrow shafts you want to have built.
You’ll add both the build service and a dozen arrows to your cart. Then checkout.
Instructions:
Step 1a: Decide what options you want on the left Build Page. Select “Build My Arrows” then you’ll proceed to the next step.
Step 1b: After you selected “Build My Arrows” a build form pops up. Complete build form to the best of your ability, blanks are fine & leave notes if needed. “Select Complete My Arrows” to add to cart.
Step 2: Select which arrow shafts you want below to have built and add to cart. If your desired shafts aren’t listed, complete the inquiry form.
Step 3: Checkout with both the build service and the arrow shaft in your cart. Don’t sweat details, I’ll reach out with any questions and confirm everything.
Not sure what you want, want custom components, or it’s not listed? Simply complete the inquiry form or email orders@thearrowbuilder.com for a free consultation.
Arrows
I will build you any arrow on the market. What you see listed in the store is my in shop availability. If you want Easton, Gold Tip, Altra, Victory or any other make/model built please use the inquiry form and I will send a quote.
In stock as listed in the USA!
The DOMINUS Series Arrow
Introducing our 4mm (.166") Nanoweight arrow designed for blistering speed and maximum F.O.C kinetic delivery and accuracy!
For over 10 years, bowhunters have been wildly successful out in the field with our original shaft, the FORTIS (previously T1). But the most common question we received this whole time was; "Are you going to make a lighter arrow?"
We listened, and we heard, and we delivered.
The DOMINUS, simply put, is BUILT DIFFERENT.
Using the best quality high modular 40T carbon available anywhere in the world, we've managed to drop the GPI by a staggering amount, while retaining strength across all spine sizes.
The result? The most premium, high performance, light GPI arrows you can get!
GPI PER SPINE
200 - 9.5 gpi
250 - 8.8 gpi
300 - 8.1 gpi
350 - 7.4 gpi
400 - 6.7 gpi
500 - 5.8 gpi
SPECS
.001" Straightness Tolerance - Every arrow is precision laser checked and sorted meticulously until your 12 pack is perfect.
+/- 1gn Weight Tolerance - Advanced manufacturing and careful quality control ensures consistent weight for every shaft.
4mm / .166" Inner Diameter - Micro diameter for accuracy and wind cutting performance. Compatible with all .166 nocks and other components.
32" shaft length - Ready to be cut down and assembled to your preference.
Top of class Outer Diameter sizes - Using their 40T carbon the DOMINUS achieves an unmatched narrow profile for a .166 shaft;
200 - 6.12mm / .241"
250 - .240"
300 - .231"
350 - .228"
400 - .221"
500 - .214"
PACKAGE INCLUDES
12x DOMINUS Shafts.
12x DOMINUS 60gn Alloy Outserts - Spine Matched. (Must be glued in prior to use)
12x TF .166 Nocks - Short profile and durable.
Try the DOMINUS shafts today and enter a new level of performance as a bowhunter!
The Contact Archery Z was developed with a focus on delivering increased speeds without the challenges associated with the run of the mill 4mm arrow. The Z is purpose built to offer improved durability, arrow recovery, and consistency to bring a lighter weight shaft to the Contact Archery line-up.
The Z Specs
+/- .0015 straightness
32 inches uncut length
Solid one-piece Micro-Cap Component adapts micro diameter shafts (.166) to standard (8-32) points
Fits all .166/G nocks
Materials
The Z is a full-carbon shaft constructed with a blend of fibers. It brings decreased weight without sacrificing durability or forgiveness.
Component Details
The Micro-Cap is a one piece outsert/collar hybrid. It covers the first .875 inches of the shaft and uses the larger diameter collar to provide increased durability over convention internal fit outserts. By passing the threads into the shaft leverage is also decreased resulting in an even stronger front end.
The titanium component (Grade 5) weighs 54 grains and the Aluminum (7075) weighs 34 grains.
All components receive standard 8-32 threaded points.
Flight And Ease Of Tune
The size, density, and tolerances of this shaft make it an easy tuner.
By utilizing an advanced composite layup post shot oscillation is reduced.
In stock in the USA! Can be ordered bareshaft or you can add a custom build.
When impact matters most, trust the VERTEX.
The all-new VERTEX is built like a tank. Designed for maximum durability and bone-crushing performance, this heavyweight GPI arrow is made to take on the toughest game. Its dense carbon construction delivers power and consistency, while our 60gr stainless steel outsert and alloy half-out maintains a high FOC—for rock-solid flight and brutal penetration.
The VERTEX is a 5mm shaft that doesn't back down.
GPI + O.D PER SPINE
250 - 10.8 gpi - 7.07mm / .278"
300 - 10.0 gpi - 6.98mm / .275"
350 - 8.7 gpi - 6.73mm / .265"
400 - 8.0 gpi - 6.66mm / .262"
500 - 6.9 gpi - 6.35mm / .254"
SPECS
.001" Straightness Tolerance - Every arrow is precision laser checked and sorted meticulously until your 12 pack is perfect.
+/- 1gn Weight Tolerance - Advanced manufacturing and careful quality control ensures consistent weight for every shaft.
5mm / .204" Inner Diameter - Optimal versatility and ease of fletching a stronger helical for hunting. Compatible with all .204 nocks and other components.
32" shaft length - Ready to be cut down and assembled to your preference.
PACKAGE INCLUDES
12x VERTEX Shafts.
12x VERTEX 60gn Stainless Collars + Alloy Inserts - Spine Matched. (Must be glued in prior to use)
12x TF .204 Nocks - Short profile and durable.
In Stock in the USA!
The FORTIS Series arrow
Utilizing industry leading technology and design, the T1 series of Terra Firma arrow is a precision engineered carbon shaft, laser checked to perfection.
Combined with the best insert/outsert available on the market, what’s left is an outstanding, bulletproof hunting arrow.
Terra Firma arrows come in matching sets of 12 sorted to tight weight tolerances of +/-0.5 grains, with straightness ratings of .001”, which means that the price tag makes these the cheapest arrows on the market at such a high quality.
The ultra-rigid aluminum insert also wraps back over the shaft, and is by far the strongest and most reliable choice. It has been developed particularly to meet the weights that hunters effectively need, each spine size has a corresponding insert to match. Most other inserts for micro shafts are either too weak, do not fit properly or are not as streamlined as this. They have been rigorously tested and are proven in consistency. All Terra Firma inserts are checked for weight tolerances.
Fits 5/16 tips (not included)
Outsert Weight - 60gn
GPI (Grains Per Inch) / OD
250 - 13.0 gpi - 6.71mm / .264"
300 - 10.8 gpi - 6.34mm / .250"
350 - 9.5 gpi - 6.13mm / .241"
400 - 8.6 gpi - 5.97mm / .235"
500 - 7.6 gpi - 5.77mm / .227"
All Shafts come at 31.5 Inch Length, Ready to Cut down.
In stock in the USA! Can be ordered bareshaft or you can add a custom build.
The SICARIO Series Arrow
Fast. Accurate. Strong. The SICARIO is here.
The all-new SICARIO is built for serious performance. Featuring ultra-light GPI carbon for speed, paired with a 60gr stainless steel outsert and alloy half-out for increased FOC - delivering unmatched stability, precision, and deep-driving penetration.
This is the 5mm shaft you have been waiting for, this is SICARIO.
GPI + O.D PER SPINE
200 - 10.7 gpi - 7.01mm / .276"
250 - 9.8 gpi - 6.85mm / .270"
300 - 8.7 gpi - 6.73mm / .265"
350 - 8.2 gpi - 6.66mm / .262"
400 - 7.0 gpi - 6.45mm / .254"
500 - 6.1 gpi - 6.35mm / .250"
SPECS
.001" Straightness Tolerance - Every arrow is precision laser checked and sorted meticulously until your 12 pack is perfect.
+/- 1gn Weight Tolerance - Advanced manufacturing and careful quality control ensures consistent weight for every shaft.
5mm / .204" Inner Diameter - Optimal versatility and ease of fletching a stronger helical for hunting. Compatible with all .204 nocks and other components.
32" shaft length - Ready to be cut down and assembled to your preference.
PACKAGE INCLUDES
12x SICARIO Shafts.
12x SICARIO 60gn Stainless Collars + Alloy Inserts - Spine Matched. (Must be glued in prior to use)
12x TF .204 Nocks - Short profile and durable.
Bargain Deal!! Get it while you can.
TYPHOON ARROWS
The Typhoon Arrow – where uncompromising performance meets affordability. Crafted with a standard carbon core and a 3K carbon weave, the Typhoon Arrow shares all the exceptional specs of the Fire & Ice but distinguishes itself with a slightly higher GPI, providing added weight for enhanced performance.
Engineered with precision, the Typhoon Arrow delivers the same unyielding strength, .204" internal diameter, and a straightness of .003" .
Experience the power and precision of the Typhoon Arrow, tailored for those who seek excellence at a more accessible price. Whether you're a seasoned professional or a budget-conscious enthusiast, elevate your archery game with the Typhoon Arrow.
Choose affordability without compromise – choose the Typhoon Arrow. Unleash your potential and conquer your target with confidence. Your journey to precision and performance starts here."
BOHNING BLAZER NOCKS & ALUMINUM INSERTS ARE INCLUDED WITH PURCHASE.
200 SPINE .204 ID 12.9 GPI .003 STRAIGHTNESS
250 SPINE .204 ID 12.1 GPI .003 STRAIGHTNESS
300 SPINE .204 ID 11.1 GPI .003 STRAIGHTNESS
350 SPINE .204 ID 10.3 GPI .003 STRAIGHTNESS
400 SPINE .204 ID 9.0 GPI .003 STRAIGHTNESS
Bargain deal!! Get them while you can!
FIRE & ICE ARROWS
"Introducing the Fire & Ice Arrow – where cutting-edge technology meets unparalleled performance for the modern archer. Crafted from high modulus carbon core with a striking 3K carbon weave outer layer, this arrow is a game-changer, delivering maximum penetration, unyielding strength, and an straightness of .003.
Engineered for excellence, the Fire & Ice Arrow ensures lightning-fast speeds and durability. Its .204" internal diameter provides the edge you need, making it the ideal choice for archers demanding the extraordinary.
Not just an arrow, but a symbol of precision and accuracy for archers of all levels. While the price reflects its top-tier quality, the Fire & Ice Arrow is your key to conquering targets with finesse and style.
Elevate your archery experience – choose the Fire & Ice. Unleash power, precision, and style with every shot. Your journey to conquering the target begins here."
BOHNING NOCK AND 50 GRAIN STAINLESS STEEL INSERT INCLUDED WITH PURCHASE
200 SPINE .204 ID 12.8 GPI .003 STRAIGHTNESS
250 SPINE .204 ID 10.7 GPI .003STRAIGHTNESS
300 SPINE .204 ID 9.3 GPI .003STRAIGHTNESS
350 SPINE .204 ID 8.8 GPI .003 STRAIGHTNESS
400 SPINE .204 ID 7.6 GPI .003 STRAIGHTNESS
The HMR is back and The Arrow Builder is ready to custom tailor them to your needs with style!
The Contact Archery HMR is an ultra-durable micro diameter hunting shaft. The low modulus fibers result in a greater wall thickness and an increased window of tune. This results in a durable arrow that is easy to tune and is built to be used and reused.
HMR Specs
+/- .0015 straightness
32 inches uncut length
Solid one-piece Micro-Cap Component adapts micro diameter shafts (.166) to standard (8-32) points
Fits all .166/G nocks
Materials
The HMR is a full-carbon shaft constructed with low modulus fibers. It has an extremely thick wall, making it very durable. The techniques used in rolling the shaft minimize the variance from the mandrel to the finished product. Resulting in a more consistent shooting experience.
Component Details
The Micro-Cap is a one piece outsert/collar hybrid. It covers the first .875 inches of the shaft and uses the larger diameter collar to provide increased durability over convention internal fit outserts. By passing the threads into the shaft leverage is also decreased resulting in an even stronger front end.
The titanium component (Grade 5) weighs 54 grains and the Aluminum (7075) weighs 34 grains.
All components receive standard 8-32 threaded points.
Flight And Ease Of Tune
The size, density, and tolerances of this shaft make it an easy tuner.
One of the greatest benefits of low modulus carbon is that the window of tune seems to be far greater, resulting in a much more forgiving arrow setup.
Bargain Price! Get them while you can.
FAULTLINE ARROWS
"Introducing the Faultline Arrow – a masterpiece in lightweight precision designed for archers eager to build high FOC (Front of Center) arrows. Crafted with a standard carbon core and featuring a .204" internal diameter, the Faultline Arrow offers impeccable performance at a remarkable price point.
Engineered for those who crave speed and agility, this arrow boasts a lightweight design, allowing archers to achieve high FOC for enhanced broadhead accuracy. With a straightness of .003", the Faultline Arrow ensures consistent and reliable performance with every shot.
Whether you're a seasoned archer or a beginner venturing into the world of high FOC customization, the Faultline Arrow is your ticket to optimal performance without breaking the bank.
Choose precision, choose affordability – choose the Faultline Arrow. Unleash your potential and build the perfect arrow for your unique style. Elevate your archery game with the Faultline – where lightweight meets precision, and performance meets value."
BOHNING NOCKS & 50 GRAIN STAINLESS HALF-OUTS ARE INCLUDED WITH ARROWS
250 SPINE .204 ID 11.2 GPI .003 STRAIGHTNESS
300 SPINE .204 ID 9.4 GPI .003 STRAIGHTNESS
350 SPINE .204 ID 8.5 GPI .003 STRAIGHTNESS
400 SPINE .204 ID 7.9 GPI .003 STRAIGHTNESS